Home Improvement, Lifestyle


Offering matching appearances and styles, to all of the melamine, acrylic and laminate varies that we sell providing cost-efficient side option for all your commercial jobs.

In addition to being economical, edging offers edging remedies for the complying with ranges:


Real Wood Veneer



Compact Mel



Bordering plays a important part in the message manufacturing of panels, we have actually identified this with a few of the most practically innovative side banders on the market. Our top quality is incomparable and also with accessibility to a big series of brand names and surfaces.

A best remedy for cabinets, closet doors, drawers, racks, tables, furnishings, components, and kitchen counters.

Use 3MM edgebanding for influence immune sides on indoor doors and work surfaces

Woodgrain designs in 3MM will certainly be stocked in PVC, with color-through graining that removes ” image framing” result when cut.

Exactly How to Use Trimming Tape

Making use of pre-glued melamine edging tapes to cover raw edges such as MDF, Plywood, Blockboard, Chipboard and various other panel edges fasts, tidy and very easy.

Follow these simple steps to apply your edging tape for great results – 

1. Cut the bordering tape to the size required, leave a little added at each end. Area the bordering to ensure that it looms uniformly on both sides of the board. If possible clamp the board in an upright placement so that the iron can be made use of flat.

2. Establish the iron to a Tool warm setting. Move it gradually along the bordering from one end to the other, use some down pressure as you move along. As the adhesive is thawing you will see a tiny bead broaden out from the underside of the bordering tape.

3. To make certain that the edging tape totally sticks to the board utilize a little block of wood and move it along the bordering from one end to the various other while still warm. Remain to use stress up until the adhesive has cooled as well as hardened.

4. Remove the excess bordering tape from each end of the board with a Stanley blade. Cut the overhanging edge with an Edge Trimming Tool or Stanley blade.

5. Get rid of sharp edges by lightly fining sand with 120-grit sand paper.