It is possible to wonder if it is better to replace or repair a leaky faucet. If you have any of these issues, we recommend you get faucet repair. The plumbers in the Bessemer region can resolve any issue with your plumbing system. We provide a variety of plumbing services. Our experts are available 24/7 day. Our plumber in Bessemer are equipped with the components and tools to repair any plumbing issue you may experience within Alabama. This ensures the highest efficiency and speedy time savings.
Leaks and Drips
Leakage is a sign that something has gone wrong with your faucet. A dripping faucet can be repaired almost every time. Water leaks can be caused by many things, but often the O-ring is the cause. The O-ring should fit snugly around the stem of the valve to stop water from escaping. However, if it is damaged or loose, it will cause a leaky faucet.
Sporadic water flow
A damaged faucet can cause spitting and sputtering from your sink faucet. Water flow problems can be caused by internal damage, blocked filters, or trapped air in the lines. Your Ottawa plumber will inspect the problem and make repairs.
Faucet Makes Noises
If the handle is squeaking when you turn it, add a bit of silicone-based grease. If the handle continues to squeak you may have a loose washer, or your valve stem is worn. High water pressure, debris or dirt in the pipes could be the cause of squealing. These issues can be fixed by calling for repairs.
Faucet from the Olden Days
A faucet older than 10 years is considered to be in its last year. Older faucets will require more maintenance as they age. It may also be difficult to find replacement parts. Problems are more likely to occur if the faucet is old and has been in use for a while.
Signs of Rusting
Sink faucets are almost always in direct contact with water, which is the perfect environment for corrosion. Over time, mineral deposits and rust build up. You may not see any signs of rusting, as it is often found inside your faucet.
Frequent Faucet Repairs
It’s better to save your money than risking faucet repairs for the tenth time. It will cost more to repair the faucet than it would cost to replace it. This is your chance to upgrade to a brand newer that comes with a warranty and free replacement parts.
High utility bills
A faulty faucet can cause major problems for your utility bills. Older faucets can waste huge amounts of water. They actually release 1-2 gallons of water per minute more than modern faucets. This is a lot water, and a lot money going down the drain.
Broken Fixture
Sometimes, the fixture may be damaged or the surrounding counter surface is in poor condition. Unfortunately, sink materials such as ceramic crack easily. Installing a new faucet in either case is advisable.
Types Of Faucets
There are four main types of faucets that you should be aware of. We have listed the four main types of faucets, along with their working principles, so you can be familiar with your options.
Ball Faucets
A ball faucet is the typical kitchen sink faucet. These single-handle faucets can be moved to control the flow of water. You can also control the temperature using the same faucet handle. The unit has a lever ball that sits above an opening that allows water to flow. It has many slots and holes. Hot and cold water flow together when the ball is properly aligned. These faucets are complex and require many parts. This can lead to leaky faucets and frequent repairs.
Disc Faucets
Disc faucets work in a similar way to ball faucets. They only require one handle. However, the inner workings of disc faucets are very different. A disc faucet is easily identifiable by its large cylindrical shape. Two ceramic discs are inside, controlling the water flow. In a chamber, hot and cold water are then combined.
Although the initial costs may be higher, the modern design is extremely reliable and you will not need to replace or repair it anytime soon.
Compression Faucets
A double-handle faucet is the oldest type of faucet that’s still in use. This type of faucet is used primarily for bathroom faucets in older houses and utility sinks. Each handle controls its temperature. They are appropriately named because they twist a “compression shaft” up or down. To seal the tap, a washer is placed inside and pressed down. The handle can be turned in the opposite direction to allow water flow again. This faucet is relatively cheap, but it tends to leak quickly.
Cartridge Faucets
Bathroom faucets with standard features usually include a hollow cartridge. A cartridge faucet can have one or two handles. Handle design may vary. To open the tap, pressure is not required. The handle is moved to shift the cartridge, which opens or closes the waterline. This sink faucet is very easy to use and durable. A simple fix for a leaky faucet is to replace the worn-out cartridge.
